The 2x Suction PoolCleaner™
uses your existing pump and filter for power. This cleaner plugs
into either your designated suction port or the skimmer. The 2x
is ideal for most average sized pools.
Some of the features that make 2
Wheel POOLCLEANER™ unique:
SELF ADJUSTING TURBINE
VANES
All the POOLCLEANER™
cleaners have the patented self-adjusting turbines, which
maximizes the power from the water flow. This turbine is similar
to a paddle wheel with blades that are adjustable. This feature
allows the POOLCLEANER™ to still move at low suction and
low pressure. In addition the folding vanes of the turbine allow
for the easy passage of larger debris through the cleaner.
STEERING SYSTEM
The 2x Suction
POOLCLEANER™ has an internal programmed steering system,
that causes the left wheel to periodically reverse, allowing the
POOLCLEANER™ to turn and then move into another direction.
For the 2x Suction POOLCLEANER™ there are five different
programmed turns ranging from 90 to 450 degrees. This feature
allows the POOLCLEANER™ to cover not only the deep end, but
also the shallow end. The POOLCLEANER™ has no problem with
uneven surfaces or strange shapes. It won’t stick in a
corner, or get hung up by a main drain.
ROBUST TIRE TREADS
One look and you will see that
the patented tire treads give the POOLCLEANER™ better
climbing ability and obstacle maneuverability. The tires come
with tread wear markers that show you when to replace your tires.
The front tires of the POOLCLEANER™ have humps (raised
treads) that allow the POOLCLEANER™ to overcome any
reasonable obstacles such as the main drain and uneven surfaces.
This makes the POOLCLEANER™ ideal for all pool surfaces and
shapes.
ADJUSTABLE SKIRT
The POOLCLEANER™ has
patented adjustable skirts that allow the cleaner to maintain
optimal suction under the machine even when it encounters
obstacles. When the POOLCLEANER™ encounters an obstacle one
(or more) of the skirts will lift up (adjust) over the obstacle
while maintaining suction under the cleaner.
| 
